Product Portfolio — Stancor Aerospace
Aerospace-grade plates, pipes, tubes and round bars — titanium, nickel, aluminium, stainless and high tensile alloy steel — made to Stancor specification at qualified mills, inspected at source and certified to the heat.
Titanium, aluminium, nickel and PH stainless plate and sheet, supplied in the ordered temper or condition.
On aerospace plate the temper matters as much as the alloy: 7075-T651 and 7050-T7451 are the same metal with different stress corrosion behaviour, and a substitution is a rejection. We supply titanium 6Al-4V and Grade 2, aluminium 2024, 7075 and 7050, Inconel 625 and 718 and 15-5PH / 17-4PH as plate and sheet from 0.5 mm to 200 mm, cut to size, with the temper and condition stated on the order and the certificate.
- thickness
- Sheet 0.5-6 mm · plate 6-200 mm
- grades
- Ti-6Al-4V, Ti Gr 2, 2024, 7075, 7050, Inconel 625/718, 15-5PH
- condition
- T3, T351, T651, T7451, annealed or aged as ordered
- supply
- Full plate, cut to size or cut to the customer's nest
- certification
- EN 10204 3.1 or 3.2 certificate traceable to the heat and lot, with the chemistry, mechanical and condition records the governing AMS or ASTM specification calls for
- approvals
- AS9100 and NADCAP accreditation held by our partner mills and processors; our own certification is in progress
- verification
- PMI on every lot against the marking and certificate before despatch
Titanium, 4130 aircraft quality, 15CDV6 and nickel alloy tube for fluid systems and tubular structures.
Aerospace tube divides into two jobs: fluid systems, where the wall tolerance and cleanliness decide acceptance, and tubular structures, where weldability does. We supply titanium Grade 2 and 6Al-4V tube to ASTM B338 and B861, 4130 aircraft quality tube to AMS 6371, 15CDV6 tube and Inconel 625 and 718 tube, from 6 mm to 150 mm outside diameter, cut to length with the heat number carried on every piece.
- size
- 6 mm to 150 mm outside diameter
- grades
- Ti Gr 2, Ti-6Al-4V, 4130 AQ, 15CDV6, Inconel 625/718
- supply
- Random and cut lengths, deburred and end-capped
- testing
- Hydrostatic, eddy current or ultrasonic to the ordered scope
- certification
- EN 10204 3.1 or 3.2 certificate traceable to the heat and lot, with the chemistry, mechanical and condition records the governing AMS or ASTM specification calls for
- approvals
- AS9100 and NADCAP accreditation held by our partner mills and processors; our own certification is in progress
- verification
- PMI on every lot against the marking and certificate before despatch
Inconel 718, Waspaloy, 300M / 4340, titanium and 15-5PH bar in the machining or aged condition.
Bar is where a machine shop loses a week if the delivery condition is wrong. We state it on the order: Inconel 718 and Waspaloy solution treated for rough machining or fully aged, 4340 and 300M vacuum melted and quenched and tempered to the ordered property class under AMS 2750 pyrometry control, titanium mill annealed or STA, and 15-5PH in condition A or aged to H900 through H1150. Sizes from 10 mm to 400 mm diameter, sawn to length.
- diameter
- 10 mm to 400 mm
- grades
- Inconel 718, Waspaloy, 4340 / 300M, Ti-6Al-4V, 15-5PH / 17-4PH
- condition
- Annealed, solution treated, aged or Q&T to the ordered class
- supply
- Random lengths or sawn to size with machining allowance
- certification
- EN 10204 3.1 or 3.2 certificate traceable to the heat and lot, with the chemistry, mechanical and condition records the governing AMS or ASTM specification calls for
- approvals
- AS9100 and NADCAP accreditation held by our partner mills and processors; our own certification is in progress
- verification
- PMI on every lot against the marking and certificate before despatch
Sawn, waterjet and abrasive cut blanks marked with part number, heat and lot, kitted by assembly.
A machine shop pays for metal it does not cut, and loses traceability the moment a blank is separated from its tag. We cut plate to size or to the customer's nest, saw bar and tube to length with the agreed machining allowance, and mark every piece with the part number, heat and lot so each blank can be verified at the machine. For repeat programmes we hold call-off stock in the ordered condition.
- cutting
- Band sawing, waterjet and abrasive cutting to the nest
- marking
- Part number, heat and lot on every piece
- logistics
- Kitted by assembly, call-off stock on agreement
- certification
- EN 10204 3.1 or 3.2 certificate traceable to the heat and lot, with the chemistry, mechanical and condition records the governing AMS or ASTM specification calls for
- approvals
- AS9100 and NADCAP accreditation held by our partner mills and processors; our own certification is in progress
- verification
- PMI on every lot against the marking and certificate before despatch